[texhax] bibtex: booktitle vs. title

Christopher Brewster C.Brewster at dcs.shef.ac.uk
Sun Aug 14 22:26:46 CEST 2005


I am using Natbib, and I was using \bibliographystyle{agsm}
because I liked the look of this.

However, increasingly my bib file contains cross-references and these are
not dealt with correctly.
For example, I have an entry like this:

Cafarella, M. J. and Etzioni, O. (2005), A search engine for natural
language
applications., in A. Ellis and T. Hagino, eds, 'WWW', ACM, pp. 442-452.

which is fine except the title is not WWW, it is "Proceedings of the 14th
international conference on World Wide Web,WWW 2005, Chiba, Japan, May
10-14, 2005"

I am not sure whether the problem lies in the bib file entry (see below), in
the style file (I have tried a number of others with the same result) or
something else.

Thank you for any suggestions,

Christopher Brewster

---------------------------------------------------------
bib entries:

@PROCEEDINGS{conf/ecml/2001,
  title = {Machine Learning: EMCL 2001, 12th European Conference on Machine
	Learning, Freiburg, Germany, September 5-7, 2001, Proceedings},
  year = {2001},
  editor = {Luc De Raedt and Peter A. Flach},
  volume = {2167},
  series = {Lecture Notes in Computer Science},
  publisher = {Springer},
  bibsource = {DBLP, http://dblp.uni-trier.de},
  booktitle = {ECML},
  isbn = {3-540-42536-5},
}
 
@PROCEEDINGS{conf/www/2005,
  title = {Proceedings of the 14th international conference on World Wide
Web,WWW
	2005, Chiba, Japan, May 10-14, 2005},
  year = {2005},
  editor = {Allan Ellis and Tatsuya Hagino},
  publisher = {ACM},
  bibsource = {DBLP, http://dblp.uni-trier.de},
  booktitle = {WWW},
  isbn = {1-59593-046-9},
}

*****************************************************
Natural Language Processing Group,
Department of Computer Science, University of Sheffield
Tel: +44(0)114-22.21967  Fax: +44 (0)114-22.21810
Regent Court, 211 Portobello Street  
Sheffield   S1 4DP   UNITED KINGDOM
Web: http://www.dcs.shef.ac.uk/~kiffer/ 
*****************************************************
A definition is the enclosing a wilderness of an 
idea within a wall of words.---  Samuel Butler

 


 
-----Original Message-----
From: texhax-bounces at tug.org [mailto:texhax-bounces at tug.org] On Behalf Of
texhax-request at tug.org
Sent: 19 July 2005 00:53
To: texhax at tug.org
Subject: texhax Digest, Vol 2005, Issue 203

Send texhax mailing list submissions to
	texhax at tug.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://tug.org/mailman/listinfo/texhax
or, via email, send a message with subject or body 'help' to
	texhax-request at tug.org

You can reach the person managing the list at
	texhax-owner at tug.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of texhax digest..."


Today's Topics:

   1. two questions (Zbigniew Nitecki)
   2. Re: \section text in cross-refs (CV Radhakrishnan)
   3. REPORT DUE TOMORROW (LEFT FOOTER DATE,	RIGHT FOOTER PAGE
      HEADER TITLE-12PT TIMES) (Cohoon, David)
   4. Re: basic question on LaTeX code (fwd) (Nathan Rollins)
   5. RE: REPORT DUE TOMORROW (LEFT FOOTER DATE,	RIGHT FOOTER PAGE
      HEADER TITLE-12PT TIMES) (Dieter Meinert)
   6. Re: two questions (Lars Madsen)
   7. linespacing in marginal notes (Lesk A.)
   8. Re: basic question on LaTeX code (fwd) (Morten H?gholm)
   9. Re: basic question on LaTeX code (fwd) (Nathan Rollins)
  10. Data in article class (Andr? Luiz Tietb?hl Ramos)


----------------------------------------------------------------------

Message: 1
Date: Mon, 18 Jul 2005 09:59:52 -0400
From: Zbigniew Nitecki <zbigniew.nitecki at tufts.edu>
Subject: [texhax] two questions
To: support at tug.org
Message-ID: <504267B5-C0C0-4FC7-98E5-DB7C2F682A71 at tufts.edu>
Content-Type: text/plain; charset="us-ascii"

1. Using the quotchap package, I have a preface (which is a chapter* rather
than chapter) but want to include a savequote which runs into the heading.
This appears to be because unlike a chapter entry, there is no big number to
make the space for an epigraph.  Is there an easy way to introduce a
"phantom" chapter number, just to create that space?

2.I want a bibliography (created by bibtex) and an index (created by
makeindex) to appear in the table of contents.  However, an
\addtocontentsline command immediately preceding the commands creating these
two items gives the page preceding the correct one.  Is there a way to
generate the correct page number in the table of contents?

Zbigniew Nitecki
Department of Mathematics
Tufts University
Medford, MA 02155

telephones:
Office    (617)627-3843
Dept.    (617)627-3234
Dept. fax    (617)627-3966

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://tug.org/pipermail/texhax/attachments/20050718/73f08deb/attachment-000
1.htm

------------------------------

Message: 2
Date: Sat, 16 Jul 2005 10:13:25 +0530 (IST)
From: "CV Radhakrishnan" <cvr at river-valley.com>
Subject: Re: [texhax] \section text in cross-refs
To: "Alan Litchfield" <alan at alphabyte.co.nz>
Cc: texhax at tug.org
Message-ID:
	<51053.59.93.42.41.1121489005.squirrel at mail.focalimage.com>
Content-Type: text/plain;charset=iso-8859-1

On Sat, July 16, 2005 2:47 am, Alan Litchfield said:

>
> Is there a package that will place \section{} text inside cross 
> references?

nameref.sty does the job for you.  You need to use \nameref instead of \ref.
nameref.sty is part of hyperref bundle.

Best regards
--
Radhakrishnan



------------------------------

Message: 3
Date: Thu, 14 Jul 2005 19:16:37 -0400
From: "Cohoon, David" <DCOHOON at wcupa.edu>
Subject: [texhax] REPORT DUE TOMORROW (LEFT FOOTER DATE,	RIGHT FOOTER
	PAGE HEADER TITLE-12PT TIMES)
To: <texhax at tug.org>
Message-ID:
	<B75BE7673F3DAD4C9116995CFB8339C00B7493EB at wcu-ex-emp1.wcupa.net>
Content-Type: text/plain; charset="us-ascii"

I need a left footer date, a right footer page number, and a 12pt TIMES
ROMAN TITLE ON EVERY PAGE -PLEASE HELP. MY PHONE IS 610-436-2641; email
is dcohoon at wcupa.edu

I have everything else taken care of - tables, equation numbers for
chapter section subsection are all fine. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://tug.org/pipermail/texhax/attachments/20050714/89535008/attachment-000
1.htm

------------------------------

Message: 4
Date: Thu, 14 Jul 2005 11:42:51 -0600 (MDT)
From: Nathan Rollins <nhr2 at ee.byu.edu>
Subject: Re: [texhax] basic question on LaTeX code (fwd)
To: texhax at tug.org
Message-ID:
	<Pine.LNX.4.44.0507141141400.19096-100000 at rhino.ee.byu.edu>
Content-Type: TEXT/PLAIN; charset=US-ASCII


If anyone has an explanation for the error explained below I would 
greatly appreciate your help!  Thanks!

Nathan.

-- 
Nathan Rollins
Brigham Young University
rollins at ee.byu.edu
work: (801)422-7206

---------- Forwarded message ----------
Date: Thu, 14 Jul 2005 09:24:47 -0600 (MDT)
From: Nathan Rollins <nhr2 at ee.byu.edu>
To: Christopher W. Ryan <cryan at binghamton.edu>
Subject: Re: [texhax] basic question on LaTeX code


Christopher,

Thank you for your willingness to help.  In the *.cls file I'm using is 
the following definition:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\@xfloat#1[#2]{\ifhmode \@bsphack\@floatpenalty -\@Mii\else
  \@floatpenalty-\@Miii\fi\def\@captype{#1}\ifinner
  \@parmoderr\@floatpenalty\z@
  \else\@next\@currbox\@freelist{\@tempcnta\csname ftype@#1\endcsname
    \multiply\@tempcnta\@xxxii\advance\@tempcnta\sixt@@n
    \@tfor \@tempa :=#2\do
    {\if\@tempa h\advance\@tempcnta \@ne\fi
      \if\@tempa t\advance\@tempcnta \tw@\fi
      \if\@tempa b\advance\@tempcnta 4\relax\fi
      \if\@tempa p\advance\@tempcnta 8\relax\fi
      }\global\count\@currbox\@tempcnta}\@fltovf\fi
  \global\setbox\@currbox\vbox\bgroup 
  \def\baselinestretch{1}\@normalsize
  \boxmaxdepth\z@
  \hsize\columnwidth \@parboxrestore}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

Without including the 'color' package things compile just fine.  When I 
include the color package I have problems with the first figure/table in 
my latex code.  For example, the first figure I include is:

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{figure}[hbtp]
\begin{center}
\epsfig{file=figs/incr72.eps,width=3in}
%\includegraphics[width=3in]{figs/incr72}
\caption{Test design: an array of 72 8-bit incrementers}
\label{fig:incr}
\end{center}
end{figure}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

In the log file I get these errors:

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
File: figs/incr72.eps Graphic file (type eps)
<figs/incr72.eps>
! Too many }'s.
\color at endbox ->\color at endgroup \egroup 
                                        
l.176 \end{figure}
                  
? q
OK, entering \batchmode...

! LaTeX Error: \begin{document} ended by \end{figure}.

! Extra \endgroup.
<recently read> \endgroup 
                          
l.176 \end{figure}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

If I comment out that definition in the *.cls file, everything works 
properly.  I have no idea what that definition is doing that causes these 
errors, or why the color package makes it choke.  Do you know what the 
problem might be?  Thanks!

Nathan.

On Thu, 14 Jul 2005, Christopher W. Ryan wrote:

> I think this TEXHAX your place!  (Not that I could answer your question, 
> being just a novice too.  But I've found the people on the list to be 
> very helpful and knowledgeable.)  Ask away!
> 

-- 
Nathan Rollins
Brigham Young University
rollins at ee.byu.edu
work: (801)422-7206





------------------------------

Message: 5
Date: Mon, 18 Jul 2005 16:34:46 +0200
From: "Dieter Meinert" <DMeinert at RosenInspection.net>
Subject: RE: [texhax] REPORT DUE TOMORROW (LEFT FOOTER DATE,	RIGHT
	FOOTER PAGE HEADER TITLE-12PT TIMES)
To: "Cohoon, David" <DCOHOON at wcupa.edu>
Cc: texhax at tug.org
Message-ID:
	<6B225A8E1148A14688736567B97860302831F0 at lin0017.roseninspection.net>
Content-Type: text/plain;	charset="us-ascii"

Try fancyheadings package.

 

Regards

Dieter 

 

***********************************************************************

* Dr. Dieter Meinert *

***********************************************************************

++++++ Do not support SPAM ++++++ use only plaintext for email ++++++

 
 


________________________________

	From: texhax-bounces at tug.org [mailto:texhax-bounces at tug.org] On
Behalf Of Cohoon, David
	Sent: Friday, 15 July 2005 1:17
	To: texhax at tug.org
	Subject: [texhax] REPORT DUE TOMORROW (LEFT FOOTER DATE,RIGHT
FOOTER PAGE HEADER TITLE-12PT TIMES)
	
	

	I need a left footer date, a right footer page number, and a
12pt TIMES ROMAN TITLE ON EVERY PAGE -PLEASE HELP. MY PHONE IS
610-436-2641; email is dcohoon at wcupa.edu

	I have everything else taken care of - tables, equation numbers
for chapter section subsection are all fine. 
----------------------------------------------------------------------------
----------------------------------------------------------------------- 
Visit ROSEN on the Internet: www.RosenInspection.net



------------------------------

Message: 6
Date: Mon, 18 Jul 2005 16:36:37 +0200 (CEST)
From: Lars Madsen <daleif at imf.au.dk>
Subject: Re: [texhax] two questions
To: Zbigniew Nitecki <zbigniew.nitecki at tufts.edu>
Cc: support at tug.org
Message-ID: <Pine.LNX.4.61.0507181636000.18652 at radagast.imf.au.dk>
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed

>
> 2.I want a bibliography (created by bibtex) and an index (created by 
> makeindex) to appear in the table of contents.  However, an 
> \addtocontentsline command immediately preceding the
> commands creating these two items gives the page preceding the correct 
> one.  Is there a way to generate the correct page number in the table of 
> contents?
>

use the tocbibind package, or a better documentclass (for example memoir)

-- 

/daleif

``You cannot help men permanently by doing for them 
what they could and should do for themselves. ''
  -- Abraham Lincoln



------------------------------

Message: 7
Date: Mon, 18 Jul 2005 15:21:40 +0100 (BST)
From: "Lesk A." <aml2 at mrc-lmb.cam.ac.uk>
Subject: [texhax] linespacing in marginal notes
To: texhax at tug.org
Message-ID: <E1DuWV2-002AUA-Ca at alf1.lmb.internal>
Content-Type: text/plain; charset=US-ASCII

Using LaTeX, I want to double-space the main text but
single-space marginal notes.

Can anyone suggest how to control, separately, the line
spacing in main text and marginal notes?

Thank you,

aml2 at mrc-lmb.cam.ac.uk



------------------------------

Message: 8
Date: Mon, 18 Jul 2005 16:48:58 +0200
From: Morten H?gholm <morten.hoegholm at gmail.com>
Subject: Re: [texhax] basic question on LaTeX code (fwd)
To: "Nathan Rollins" <nhr2 at ee.byu.edu>
Cc: texhax <texhax at tug.org>
Message-ID: <op.st353woijli536 at mortens-ibook.local>
Content-Type: text/plain; format=flowed; delsp=yes; charset=iso-8859-1

On Thu, 14 Jul 2005 19:42:51 +0200, Nathan Rollins <nhr2 at ee.byu.edu> wrote:

>
> If anyone has an explanation for the error explained below I would
> greatly appreciate your help!  Thanks!

Not surprising, as that definition assumes it's running on LaTeX2.09 which  
has been obsolete for more than ten years. The object of this redefinition  
is to ensure single line spacing within a float. I am certain that  
setspace.sty has a better and more current way of handling this.

However you have to help it a little: Before \documentclass do a

\makeatletter
\let\LTX at xfloat\@xfloat
\makeatother

and then after \documentclass do the reverse

\makeatletter
\let\@xfloat\LTX at xfloat
\makeatother

Then load setspace.

In any case the document class you are using is not suited usage these  
days. If you were told by someone to use it, tell them that LaTeX2e has  
been around for a looong time...
-- 
Morten



------------------------------

Message: 9
Date: Mon, 18 Jul 2005 09:13:11 -0600 (MDT)
From: Nathan Rollins <nhr2 at ee.byu.edu>
Subject: Re: [texhax] basic question on LaTeX code (fwd)
To: Morten H?gholm <morten.hoegholm at gmail.com>
Cc: texhax <texhax at tug.org>
Message-ID:
	<Pine.LNX.4.44.0507180912480.19096-100000 at rhino.ee.byu.edu>
Content-Type: TEXT/PLAIN; charset=ISO-8859-1


Thank you very much Morten!  I really appreciate that help.

Nathan.

On Mon, 18 Jul 2005, Morten Hxgholm wrote:

> On Thu, 14 Jul 2005 19:42:51 +0200, Nathan Rollins <nhr2 at ee.byu.edu>
wrote:
> 
> >
> > If anyone has an explanation for the error explained below I would
> > greatly appreciate your help!  Thanks!
> 
> Not surprising, as that definition assumes it's running on LaTeX2.09 which

> has been obsolete for more than ten years. The object of this redefinition

> is to ensure single line spacing within a float. I am certain that  
> setspace.sty has a better and more current way of handling this.
> 
> However you have to help it a little: Before \documentclass do a
> 
> \makeatletter
> \let\LTX at xfloat\@xfloat
> \makeatother
> 
> and then after \documentclass do the reverse
> 
> \makeatletter
> \let\@xfloat\LTX at xfloat
> \makeatother
> 
> Then load setspace.
> 
> In any case the document class you are using is not suited usage these  
> days. If you were told by someone to use it, tell them that LaTeX2e has  
> been around for a looong time...
> 

-- 
Nathan Rollins
Brigham Young University
rollins at ee.byu.edu
work: (801)422-7206



------------------------------

Message: 10
Date: Mon, 18 Jul 2005 20:30:29 -0300
From: Andr? Luiz Tietb?hl Ramos 	<andreltramos at terra.com.br>
Subject: [texhax] Data in article class
To: <support at tug.org>
Message-ID: <20050718233037.DC94C40037 at moroto.terra.com.br>
Content-Type: text/plain; charset="iso-8859-1"

Hello,
 
Sorry to disturb but how can I get rid of the date generated automatically
in the article class please?
 
Thank you very much indeed,
 
Prof. Andri Luiz Tietbvhl Ramos, M.Sc.
Ph.D. Candidate
Virginia Tech
Professor - Dept. Engenharia Mecbnica e Mecatrtnica - PUC/RS
http://www.em.pucrs.br/~andreltr
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://tug.org/pipermail/texhax/attachments/20050718/06f9330a/attachment.htm

------------------------------

_______________________________________________
texhax mailing list
texhax at tug.org
http://tug.org/mailman/listinfo/texhax

End of texhax Digest, Vol 2005, Issue 203
*****************************************




More information about the texhax mailing list